eLINE LB, 12, with two seals, reduced, CR, greased
KBC-12-DD-RT-NR-G
eLINE-KB, 12, Mit zwei Dichtungen, RT, NR, Gefettet
€27.25 excl. VAT
At a glance
- Tariff number
- 84821010
- Country of origin
- RO
- Weight
- 0.019 kg
Technical Data
| Abmessung C | 28 |
| Abmessung d | 12 mm |
| Abmessung D | 19 mm |
| Version | Nichtrostend |
| Außendurchmesser D | 19 mm |
| Bauform Kugelbüchsenführungen | - Geschlossen |
| Series | Compact (eLINE) |
| Seal | 2 integrierte Dichtringe |
| Dynamische Tragzahl C | 610 N |
| Fußnote Minimale Dynamische Tragzahl Cmin | Die Festlegung der dynamischen Tragzahlen basiert auf 100 000 m Hubweg. Werden 50 000 m zugrunde gelegt, die Werte C nach Tabelle mit 1,26 multiplizieren. |
| Fußnote Maximale Dynamische Tragzahl Cmax | Die Festlegung der dynamischen Tragzahlen basiert auf 100 000 m Hubweg. Werden 50 000 m zugrunde gelegt, die Werte C nach Tabelle mit 1,26 multiplizieren. |
| Fußnote Reibkraft FR | Reibkräfte der mit beidseitig integrierten Dichtringen ausgerüsteten Kugelbüchsen ohne radiale Belastung. Die Reibkräfte sind von der Geschwindigkeit und Schmierung abhängig. |
| Länge Kugelbüchse | 28 mm |
| Losbrechkraft | 1.5 N |
| Maximum permissible linear speed vmax | 5 m/s |
| Maximum acceleration amax | 150 m/s² |
| Maximale dynamische Tragzahl Cmax | 610 N |
| Radialluft | reduzierte Radialluft |
| Lubrication | Gefettet |
| Serie | Compact (eLINE) |
| Static load rating C0 | 500 N |
| Type | Kugelbüchse |
| Wellendurchmesser d | 12 mm |
| Permissible ambient temperature (min. … max.) | -10 °C ... +80 °C |
Product Description
Linear bushing eLINE
Compact (C)
Shaft diameter d = 12
With two seals
Radial clearance: Reduced
Version: Corrosion-resistant
Greased
- Low-cost linear bushing for general requirements
- Small outer dimensions and highly compact construction
- Stainless steel for the medical, chemistry and food industries: Segmental load bearing plates comprising 1.4037 balls made from 1.3541
- Reduced radial clearance for applications where minimal-clearance bearings with an H7 bore are desired
- Initial lubrication with Dynalub 510
- High dynamic load rating and long service life due to hardened segmental load-bearing plates with ball conformity in the running track
- Simple mounting: Just press on – no additional retention needed
- High travel speed (5 m/s)
- Integrated wiper seals, external seals or no wiper seals
- Integrated metal retainer about 0.1 mm larger than outer diameter (shaft diameters 12 to 50) for secure fit in housing bore
- Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life
- Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming.
- POM ball retainer
- Balls made of rolling bearing steel