eLINE LB, 16, with two seals, reduced, greased
KBC-16-DD-RT-G
eLINE-KB, 16, Mit zwei Dichtungen, RT, Gefettet
€13.72 excl. VAT
At a glance
- Tariff number
- 84821010
- Country of origin
- RO
- Weight
- 0.028 kg
Technical Data
| Abmessung C | 30 |
| Abmessung d | 16 mm |
| Abmessung D | 24 mm |
| Version | Normal |
| Außendurchmesser D | 24 mm |
| Bauform Kugelbüchsenführungen | - Geschlossen |
| Series | Compact (eLINE) |
| Seal | 2 integrierte Dichtringe |
| Fußnote Minimale Dynamische Tragzahl Cmin | Die Festlegung der dynamischen Tragzahlen basiert auf 100 000 m Hubweg. Werden 50 000 m zugrunde gelegt, die Werte C nach Tabelle mit 1,26 multiplizieren. |
| Fußnote Maximale Dynamische Tragzahl Cmax | Die Festlegung der dynamischen Tragzahlen basiert auf 100 000 m Hubweg. Werden 50 000 m zugrunde gelegt, die Werte C nach Tabelle mit 1,26 multiplizieren. |
| Fußnote Reibkraft FR | Reibkräfte der mit beidseitig integrierten Dichtringen ausgerüsteten Kugelbüchsen ohne radiale Belastung. Die Reibkräfte sind von der Geschwindigkeit und Schmierung abhängig. |
| Länge Kugelbüchse | 30 mm |
| Losbrechkraft | 2 N |
| Maximum permissible linear speed vmax | 5 m/s |
| Maximum acceleration amax | 150 m/s² |
| Maximale dynamische Tragzahl Cmax | 1120 N |
| Radialluft | reduzierte Radialluft |
| Lubrication | Gefettet |
| Serie | Compact (eLINE) |
| Type | Kugelbüchse |
| Wellendurchmesser d | 16 mm |
| Permissible ambient temperature (min. … max.) | -10 °C ... +80 °C |
Product Description
Linear bushing eLINE
Compact
Shaft diameter d = 16
With two seals
Radial clearance: Reduced
Version: Standard
Greased
- Small outer dimensions and highly compact construction
- Reduced radial clearance for applications where minimal-clearance bearings with an H7 bore are desired
- Initial lubrication with Dynalub 510
- Low-cost linear bushing for general requirements
- Small outer dimensions and highly compact construction
- High dynamic load rating and long service life due to hardened segmental load-bearing plates with ball conformity in the running track
- Reduced radial clearance for applications where minimal-clearance bearings with an H7 bore are desired
- Initial lubrication with Dynalub 510
- Simple mounting: Just press on – no additional retention needed
- High travel speed (5 m/s)
- Integrated wiper seals, external seals or no wiper seals
- Integrated metal retainer about 0.1 mm larger than outer diameter (shaft diameters 12 to 50) for secure fit in housing bore
- Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life
- Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming.
- POM ball retainer
- Balls made of rolling bearing steel