Parker Montagemaschinen für EO/EO-2 und Triple-Lok®, Ø 04-22 mm
Parker EOMATPRO22400V

Parker Montagemaschinen für EO/EO-2 und Triple-Lok®, Ø 04-22 mm

EOMAT-Maschinen werden speziell für die hohen Standards der EO-2, EO PSR/DPR Progressivring und Triple Lok®-Verschraubungen entwickelt. Die Montage wird mit einer hohen Präzision und Wiederholbarkeit erreicht.

€44,485.68 excl. VAT

order item Delivery approx. 16 weeks

At a glance

Tariff number
84629090
Country of origin
DE
Weight
90 kg

Technical Data

Tube outside diameter (mm)04-22
VariantWirtschaftliche Montagemaschine für EO-2- und Progressivring-Verschraubungen

Product Description

The EOMAT PRO is a powerful machine for economical and safe tube installations. The device is designed for installation of Parker EO-2 and progressive ring fittings to DIN EN ISO 8483-1 (DIN2352) with common tube materials (steel, stainless steel, copper, nylon). The EOMAT PRO is fast and quiet. It permits the assembly of very tight and complex tube bends. Automatic tool detection guarantees short set-up times and prevents errors due to setting the device incorrectly. Unlike conventional cutting ring assembly devices, the EOMAT PRO is stroke-controlled and produces accurate and reproducible assembly results. The EOMAT PRO can be used in automatic or manual mode. In automatic mode, the settings are read from a transponder chip in the tool. The operator cannot change the device settings in automatic mode. In the display the tube diameter and the type of installation (EO-2 or progressive ring) will be shown. There is also a useful piece counter which can be reset by the operator. Other messages can appear about the assembly cones - for example, notifications about routine checks and tool lifetime. If there is a significant, implausible variation, the display will show an error message. If universal MOK tools are used with universal parameters, this means that only implausible gross deviations will be displayed. Adaptive assembly cones (MOK-RW) permit the operator to control and set the installation parameters and limits in a few simple steps. In this way the tool is optimized for the specific installation. These individual parameters deliver the best results for the tube material, wall thickness and lubricant used. The device will show slight deviations from the nominal values with a red warning light and a prompt in the display to check the installation. It is therefore possible to detect connections that have been incorrectly installed, check them and remove from the process if needed (e.g. the ring was mounted the wrong way around). Automatic tool detection, the stored installation values and the display of error messages (red warning light and display) cannot be achieved in automatic mode by the operator.

Documents & Downloads