Parker P1F-R063MSX0530-0000 Normzylinder ISO 15552 ø:63 mm Hub:530 mm

Product Description

Perfect integration of two piston rods allowing to accept off-center forces of the cylinder axis. The non rotate twin rods version is mainly used for specific applications where piston rotation is not acceptable.
Available in bore sizes Ø32mm - Ø100mm with smooth profile tube, adjustable pneumatic cushioning, magnetic piston and standard temperature -20°C to +80°C. Available in two versions.
- P1F-R Series : Double acting twin rods (single twin rod one side only).
- P1F-Q Series : Double acting through twin rods (both side twin rods).

Markets:
• Factory Automation
• Machine Tools
• Packaging Machinery
• Vehicle Assembly Facilities
• Material Handling

Features / Benefits:
• Smooth profile design in natural appearance
• Twin piston rods
• Bore sizes 32 to 100 mm with strokes up to 2 meter
• Temperature range up to +150° HIGH temperature
• Stainless steel piston rod as standard
• Range of mountings and sensors of the P8S Series
• IO-Link ready with new P8S CPS sensor
• PTS labelling for improved MRO services
• All proven Parker Prädifa seal technology inside for long performance life

Applications:
General industry – Linear movement
• Push objects
• Stop/Hold/Go
General industry - Clamping
• Clamp objects
• Fix / hold in position
General industry - Holding
• Lift, moving, clamping
General industry - Controlling
• Change lane, direction
• Change level
Packaging – Moving
• Push / pull objects
• Sorting, conveying

General Technical Data:
• International Standards : N/A
• Bore Sizes : Ø32, Ø40, Ø50, Ø63, Ø80 and Ø100mm
• Stroke length: 2000mm maximum
• Versions: Double acting single twin rods (P1F-R) / double acting twin through rods (P1F-Q)
• Cushioning : Adjustable pneumatic
• Position Sensing : Choose between electronic or reed sensors with various cable lengths and 8 mm threaded or flying lead connection.
• Installation : A wide range of cylinder mountings.
• Mounting Position : Any


Operating and Environmental Data:
• Operating Medium : For best possible service life and trouble-free operation dry, filtered compressed air to ISO 8573-1:2010 quality class 3.4.3 should be used. This specifies a dew point of +3°C for indoor operation (a lower dew point should be selected for minus temperature operation and we recommend the use of an inline dryer) and is in line with the air quality from most standard compressors with a standard filter.
• Operating Pressure : 10 bar maximum
• Operating Temperature :
Standard temperature -20°C to +80°C
High temperature -10°C to +150°C

• Pre-lubricated : Further lubrication is normally not necessary. If additional lubrication is introduced it must be continued.
• Corrosion Resistance : Resistance to corrosion and chemicals.

Material Specification:
• End Covers : Cast aluminium
• Cylinder Barrel : Anodised aluminium
• Piston Rod : Stainless steel
• End Cover Screws : Non alloy steel
• Scraper Ring : NBR (Nitrile rubber)
• Piston Rod Seal : NBR (Nitrile rubber)
• Piston : Aluminium
• Magnet : DPM-2
• Piston Bearing :PTFE
• Piston Seals : NBR (Nitrile rubber)
• Piston Bolt : Non alloy steel
• O rings : NBR (Nitrile rubber)
• Piston Rod Bearing : Clean metal
• Cushion Screws : Brass
• Cushion Seals : NBR (Nitrile rubber)