The cam roller single bearing is characterized by the following product features: Format SKS, size 52, aluminum, accuracy economic, load class FN
LWA-052-SKS-FN-E-0
Die Laufrollen-Einzelkassette zeichnet sich durch folgende Produkteigenschaften aus: Bauform SKS, Baugröße 52, Aluminium, Genauigkeit Economic , Belastungsklasse FN
€89.65 excl. VAT
At a glance
- Tariff number
- 84829900
- Weight
- 0.28 kg
Technical Data
| Dimension A (profiled rail guides) | 44.5 mm |
| Dimension A1 (profiled rail guides) | 65 mm |
| Dimension A2 (profiled rail systems) | 2 mm |
| Dimension B (profiled rail guides) | 104 mm |
| Dimension E1 | 66 mm |
| Dimension E2 (profiled rail guides) | 42 mm |
| Dimension H | 40 mm |
| Dimension H1 (profiled rail guides) | 29.5 |
| Abmessung H2 (Profilschienenführungen) | 14.9 mm |
| Abmessung H3 | 2.5 mm |
| Abmessung O1 Gewindedurchmesser | M10 |
| Abmessung O1 Gewindedurchmesser Fußnote | Befestigungsschrauben werden nicht mitgeliefert. Für Schrauben ISO 4014 8.8 ist eine Unterlegscheibe nach ISO 7089 erforderlich. |
| Dimension S1 (profiled rail guides) | 22 mm |
| Version | Laufrollenführung |
| Betriebstemperatur (min. … max.) | -20 °C ... +80 °C |
| Runner block width | 44.5 mm |
| Hinweis maximal zulässige Geschwindigkeit vmax | Bei mittlerer Belastung. |
| Runner block height | 29.5 mm |
| Runner block height with guide rail | 40 mm |
| Runner block length | 104 mm |
| Maximum permissible linear speed vmax | 10 m/s |
| Maximal zulässiges dynamisches Torsionsmoment um die x-Achse Mx max | 0,75· a |
| Maximal zulässiges dynamisches Torsionsmoment um die y-Achse My max | 0,75· b |
| Maximal zulässiges dynamisches Torsionsmoment um die z-Achse Mz max | 1,2 · b |
| Maximum acceleration amax | 50 m/s² |
| Maximum operating temperature | + 80 |
| Maximale dynamische Belastung in y-Richtung Fy max | 2500 N |
| Maximale dynamische Belastung in z-Richtung Fz max | 1500 N |
| Maximale statische Belastung durch eine resultierende Kraft in Y-Richtung F0y max | 2500 N |
| Minimum operating temperature | - 20 |
| Nominal size | 52 |
Product Description
The cam roller single bearing is characterized by the following product features:
Size 52
Format SKS: Width = slimline, length = short, height = standard
Runner block body made of aluminum
Standard load carrying capacity
Accuracy class E: Economic
Without preservation
Without initial lubrication
Without attachment element, left (front reference edge)
Without attachment element, right (front reference edge)
Lube nipple integrated
Standard version
Overall length of the runner block = 104
Interchangeable element
- Distance of the runner blocks on the table construction is freely selectable
- Zero-clearance adjustment using socket hex screws on the rear side of the runner blocks.
- Tough all-round sealing with excellent wiping action. Grease lubrication recommended.
- On two half-rails